ANSI chemical process pumps from Furkey supplier are centrifugal process pumps that meet the standards of the American National Standards Institute (ANSI). By definition, these chemical pumps are horizontal, end suction single stage, centerline discharge, centrifugal pumps comparable in size and dimensions regardless of pump manufacturer. These pumps are required to meet the ANSI / ASME B73.1 standard of the American Society of Mechanical Engineers (ASME).
The ASME B73.1 standard states the dimensional interchangeability requirements, configuration and design features to pump manufacturers in order to facilitate the installation, as well as to enhance reliability and safety of the pump unit. Additionally, these standards set the guidelines and recommended practices related to the maintenance of these process pumps. The main focus of this standard is that all ANSI pumps manufacturers offer interchangeable equipment with respect to mounting dimensions, size and location of suction, and discharge nozzles, input shafts, baseplates, and foundation bolt holes.
Even though ANSI chemical pumps they are mostly used in the chemical and petrochemical industries, they can also be found in paper stock, ethanol production, pharmaceutical, food processing and several other process plants. They are most often used to pump thin fluids such as water, alcohols, and other less aggressive fluids. Depending on the impeller type, they can even pump fluids with solids. Moreover, with the right material selection, they can transfer highly corrosive and aggressive liquids.
1， Dimensional Standardization: The dimensions for installation like impeller sizes and suction flange dimensions are standardized, which helps in easy replacement and upgrade.
2， Material Versatility: They are available in a range of materials to handle various liquid properties, including corrosive and abrasive fluids.
3， Mechanical Seals: These pumps typically use mechanical seals to prevent leaks, which can be critical when handling hazardous chemicals.
4， Back Pull-Out Design: This design allows for easy maintenance and repair as the rotating assembly can be removed without disconnecting the pump from the piping system.
